The ML350 is the biggest planetary machine on Earth
The ML350 is the biggest planetary machine on Earth and can polish round tubes up to 356mm in diameter.
Is this the right machine for you?
NS Máquinas has 7 different planetary wheel sizes to suit any of your requirements. Meet all the family: ML50, ML75, ML100, ML150, ML200, ML300 and now...the ML350.
ML350: LARGE DIAMETERS TUBE FINISHING
The concept of planetary system: the abrasive belts rotate around the tube while the feeding rollers are transporting it through the finishing stations of the machine. All ML machines are equipped with this system.
Unlike the centerless system, the planetary concept grants almost no vibration and keeps the temperature to a minimum, preventing material distortion and ensuring a better-quality finishing. It is also possible to finish different shaped tubes, like oval, conic, being them drilled or tapered.
The ML350 is born from the need to finish long, large diameters tubes. It’s a one-of-a-kind machine, helping companies being more automated in the finishing process. The reasoning behind the machine is to accomplish the joint venture between a perfect looking finishing, and the safety of the operator.
To feed these large tubes into the machine, two motors with 0.37kW on each side are being used, ensuring enough strength to transport tubes up to 600kg and a two-direction feeding system. While feeding the tube into the machine, ML350 has a photocells system to open the abrasive belts when the tube is entering the orbital wheel, allowing a lifetime increase of this polishing consumable. The 5.5kW motor puts the orbital wheel spinning around the tube and the 15Kw motor runs the 120x2300mm long abrasive belts, making them go up to 25m/s. The large measures of the abrasive belts result in a larger point of contact with the tube, leading to more material removed and less time spent replacing consumables.
And then… things get interesting. ML350, like its younger brother ML300 joins the free belt system (common to all ML machines) with a double pressure roller: Flexibility to cope with out-of-round tubes and stock removal in one finishing machine. The abrasive belts are supported by a double system of 3+1 rollers. 3 main rollers – one to run the abrasive belt, another for diameter adjustment, and the last one for belt tensioning. Then the pressure roller that works as an automatic contact roller. This roller will apply pressure on the tube, enforcing the removal of more material. In the end, the worker can choose whether to use it or not and its tension and the abrasive belt’s flexibility. The result? The grinding pressure you would get with 2 contact grinding rollers (one assembled on each abrasive belt) and the beauty of the planetary system where tube does not spin.
But things don’t end here. With the combination of photocells and a user-friendly programmable software, internally developed, it’s possible to work in 2 different automatic modes: automatic standard and automatic with repetition. In the standard mode, the abrasive belts open automatically for tube entrance, close tight to the tube to make pressure and open just on the very extremity of the product, allowing a complete automatic tube finishing. The automatic mode with repetition allows the tube to pass through the orbital wheel as many times as programmed, until reaching the desired finishing. This can be used for high rates of material removal or whenever a fine finishing is required. In this mode, the worker is free to do other jobs while the machine does the work it was programmed for. All the programs can be stored and saved for future uses, making the change of diameters and types of work easier than ever.
Together with this, ML350 features an energy saving mode also, with automatic start and stop. The motors are turned on when needed and turned off automatically as soon the machine detects there is no tube inside. More, the machine shuts down completely after five minutes of inactivity, avoiding unnecessary energy waste.
Finally, in order to increase the machine autonomy, NS MÁQUINAS has been developing and supplying a large number of solutions for tubes automatic loading and unloading. Conveyor systems or bundle type and be integrated to any ML tube finishing machine, including ML350 On the conveyor concept, operator feeds the table with tubes, one by one, being the separated individuate with physical barriers. This method ensures there is no undesired scratches after finishing. On the other hand, the bundle type enables loading and unloading the tubes in a group, leading to great savings in handling and processing time. These loading and unloading systems will increase the time the machine works automatically without any type of intervention, releasing the operator from heavier tasks and contributing also to a higher safety level.
Having all of this, the ML350 is an all-in-one machine that ensures automatisation, safety, and a consistent finish in large diameters, long and heavy tubes.
Contact us for more information on 0113 255 8887
Ends.